graphic three-dimensional image. This 3-D technique, “Computerized
Axial Tomography” or the CAT-scan, won a Nobel Prize in 1979 for its
originators, Godfrey Hounsfield and Allan Cormack.
Sonography uses ultrasound to study human tissue through its
reflection of high-frequency vibration: sonography is a sonic window.
Magnetic resonance imaging, however, is a more sophisticated
window yet. It is rivalled only by the lesser-known and still rather
experimental PET-scan, or Positron Emission Tomography. PET—
scanning requires an injection of radioactive isotopes into the body so
that their decay can be tracked within human tissues. Magnetic
resonance, though it is sometimes known as Nuclear Magnetic
Resonance, does not involve radioactivity.
The phenomenon of “nuclear magnetic resonance” was
discovered in 1946 by Edward Purcell of Harvard, and Felix Block of
Stanford. Purcell and Block were working separately, but published
their findings within a month of one another. In 1952, Purcell and
Block won a joint Nobel Prize for their discovery.
If an atom has an odd number of protons and neutrons, it will
have what is known as a “magnetic moment:” it will spin, and its axis
will tilt in a certain direction. When that tilted nucleus is put into a
magnetic field, the axis of the tilt will change, and the nucleus will also
wobble at a certain speed. If radio waves are then beamed at the
wobbling nucleus at just the proper wavelength, they will cause the
wobbling to intensify — this is the “magnetic resonance” phenomenon.
The resonant frequency is known as the Larmor frequency, and the
Larmor frequencies vary for different atoms.
Hydrogen, for instance, has a Larmor frequency of 42.58
megahertz. Hydrogen, which is a major constituent of water and of
carbohydrates such as fat, is very common in the human body. If radio
waves at this Larmor frequency are beamed into magnetized hydrogen
atoms, the hydrogen nuclei will absorb the resonant energy until they
reach a state of excitation. When the beam goes off, the hydrogen
nuclei will relax again, each nucleus emitting a tiny burst of radio
energy as it returns to its original state. The nuclei will also relax at
slightly different rates, depending on the chemical circumstances
around the hydrogen atom. Hydrogen behaves differently in different
kinds of human tissue. Those relaxation bursts can be detected, and
timed, and mapped.
The enormously powerful magnetic field within an MRI machine
can permeate the human body; but the resonant Larmor frequency is
beamed through the body in thin, precise slices. The resulting images
are neat cross-sections through the body. Unlike X-rays, magnetic
resonance doesn’t ionize and possibly damage human cells. Instead, it
gently coaxes information from many different types of tissue, causing
them to emit tell-tale signals about their chemical makeup. Blood, fat,
bones, tendons, all emit their own characteristics, which a computer
then reassembles as a graphic image on a computer screen, or prints
out on emulsion-coated plastic sheets.
An X-ray is a marvelous technology, and a CAT-scan more
marvelous yet. But an X-ray does have limits. Bones cast shadows in X—
radiation, making certain body areas opaque or difficult to read. And Xray images are rather stark and anatomical; an X-ray image cannot
even show if the patient is alive or dead. An MRI scan, on the other
hand, will reveal a great deal about the composition and the health of
living tissue. For instance, tumor cells handle their fluids differently
than normal tissue, giving rise to a slightly different set of signals. The
MRI machine itself was originally invented as a cancer detector.
After the 1946 discovery of magnetic resonance, MRI techniques
were used for thirty years to study small chemical samples. However, a
cancer researcher, Dr. Raymond Damadian, was the first to build an MRI
machine large enough and sophisticated enough to scan an entire
human body, and then produce images from that scan. Many scientists,
most of them even, believed and said that such a technology was decades
away, or even technically impossible. Damadian had a tough,
prolonged struggle to find funding for for his visionary technique, and
he was often dismissed as a zealot, a crackpot, or worse. Damadian’s
struggle and eventual triumph is entertainingly detailed in his 1985
biography, A MACHINE CALLED INDOMITABLE.
Damadian was not much helped by his bitter and public rivalry
with his foremost competitor in the field, Paul Lauterbur. Lauterbur,
an industrial chemist, was the first to produce an actual magnetic—
resonance image, in 1973. But Damadian was the more technologically
ambitious of the two. His machine, “Indomitable,” (now in the
Smithsonian Museum) produced the first scan of a human torso, in 1977.
(As it happens, it was Damadian’s own torso.) Once this proof-of—
concept had been thrust before a doubting world, Damadian founded a
production company, and became the father of the MRI scanner
industry.
By the end of the 1980s, medical MRI scanning had become a
major enterprise, and Damadian had won the National Medal of
Technology, along with many other honors. As MRI machines spread
worldwide, the market for CAT-scanning began to slump in comparison.
Today, MRI is a two-billion dollar industry, and Dr Damadian and his
company, Fonar Corporation, have reaped the fruits of success. (Some
of those fruits are less sweet than others: today Damadian and Fonar
Corp. are suing Hitachi and General Electric in federal court, for
alleged infringement of Damadian’s patents.)
MRIs are marvelous machines — perhaps, according to critics, a
little too marvelous. The magnetic fields emitted by MRIs are extremely
strong, strong enough to tug wheelchairs across the hospital floor, to
wipe the data off the magnetic strips in credit cards, and to whip a
wrench or screwdriver out of one’s grip and send it hurtling across the
room. If the patient has any metal imbedded in his skin — welders and
machinists, in particular, often do have tiny painless particles of
shrapnel in them — then these bits of metal will be wrenched out of the
patient’s flesh, producing a sharp bee-sting sensation. And in the
invisible grip of giant magnets, heart pacemakers can simply stop.
MRI machines can weigh ten, twenty, even one hundred tons.
And they’re big — the scanning cavity, in which the patient is inserted,
is about the size and shape of a sewer pipe, but the huge plastic hull
surrounding that cavity is taller than a man and longer than a plush
limo. A machine of that enormous size and weight cannot be moved
through hospital doors; instead, it has to be delivered by crane, and its
shelter constructed around it. That shelter must not have any iron
construction rods in it or beneath its floor, for obvious reasons. And yet
that floor had better be very solid indeed.
Superconductive MRIs present their own unique hazards. The
&
nbsp; superconductive coils are supercooled with liquid helium.
Unfortunately there’s an odd phenomenon known as “quenching,” in
which a superconductive magnet, for reasons rather poorly understood,
will suddenly become merely-conductive. When a “quench” occurs, an
enormous amount of electrical energy suddenly flashes into heat,
which makes the liquid helium boil violently. The MRI’s technicians
might be smothered or frozen by boiling helium, so it has to be vented
out the roof, requiring the installation of specialized vent-stacks.
Helium leaks, too, so it must be resupplied frequently, at considerable
expense.
The MRI complex also requires expensive graphic-processing
computers, CRT screens, and photographic hard-copy devices. Some
scanners feature elaborate telecommunications equipment. Like the
giant scanners themselves, all these associated machines require
power-surge protectors, line conditioners, and backup power supplies.
Fluorescent lights, which produce radio-frequency noise pollution, are
forbidden around MRIs. MRIs are also very bothered by passing CB
radios, paging systems, and ambulance transmissions. It is generally
considered a good idea to sheathe the entire MRI cubicle (especially the
doors, windows, electrical wiring, and plumbing) in expensive, well-grounded sheet-copper.
Despite all these drawbacks, the United States today rejoices in
possession of some two thousand MRI machines. (There are hundreds in
other countries as well.) The cheaper models cost a solid million dollars
each; the top-of-the-line models, two million. Five million MRI scans
were performed in the United States last year, at prices ranging from
six hundred dollars, to twice that price and more.
In other words, in 1991 alone, Americans sank some five billion
dollars in health care costs into the miraculous MRI technology.
Today America’s hospitals and diagnostic clinics are in an MRI
arms race. Manufacturers constantly push new and improved machines
into the market, and other hospitals feel a dire need to stay with the
state-of-the-art. They have little choice in any case, for the balky,
temperamental MRI scanners wear out in six years or less, even when
treated with the best of care.
Patients have little reason to refuse an MRI test, since insurance
will generally cover the cost. MRIs are especially good for testing for
neurological conditions, and since a lot of complaints, even quite minor
ones, might conceivably be neurological, a great many MRI scans are
performed. The tests aren’t painful, and they’re not considered risky.
Having one’s tissues briefly magnetized is considered far less risky than
the fairly gross ionization damage caused by X-rays. The most common
form of MRI discomfort is simple claustrophobia. MRIs are as narrow as
the grave, and also very loud, with sharp mechanical clacking and
buzzing.
But the results are marvels to behold, and MRIs have clearly
saved many lives. And the tests will eliminate some potential risks to
the patient, and put the physician on surer ground with his diagnosis.
So why not just go ahead and take the test?
MRIs have gone ahead boldly. Unfortunately, miracles rarely
come cheap. Today the United States spends thirteen percent of its Gross
National Product on health care, and health insurance costs are
drastically outstripping the rate of inflation.
High-tech, high-cost resources such as MRIs generally go to to
the well-to-do and the well-insured. This practice has sad
repercussions. While some lives are saved by technological miracles —
and this is a fine thing — other lives are lost, that might have been
rescued by fairly cheap and common public-health measures, such as
better nutrition, better sanitation, or better prenatal care. As advanced
nations go, the United States a rather low general life expectancy, and a
quite bad infant-death rate; conspicuously worse, for instance, than
Italy, Japan, Germany, France, and Canada.
MRI may be a true example of a technology genuinely ahead of
its time. It may be that the genius, grit, and determination of Raymond
Damadian brought into the 1980s a machine that might have been better
suited to the technical milieu of the 2010s. What MRI really requires for
everyday workability is some cheap, simple, durable, powerful
superconductors. Those are simply not available today, though they
would seem to be just over the technological horizon. In the meantime,
we have built thousands of magnetic windows into the body that will do
more or less what CAT-scan x-rays can do already. And though they do
it better, more safely, and more gently than x-rays can, they also do it
at a vastly higher price.
Damadian himself envisioned MRIs as a cheap mass-produced
technology. “In ten to fifteen years,” he is quoted as saying in 1985,
“we’ll be able to step into a booth — they’ll be in shopping malls or
department stores — put a quarter in it, and in a minute it’ll say you
need some Vitamin A, you have some bone disease over here, your blood
pressure is a touch high, and keep a watch on that cholesterol.” A
thorough medical checkup for twenty-five cents in 1995! If one needed
proof that Raymond Damadian was a true visionary, one could find it
here.
Damadian even envisioned a truly advanced MRI machine
capable of not only detecting cancer, but of killing cancerous cells
outright. These machines would excite not hydrogen atoms, but
speculated that certain Larmor frequencies in phosphorus might be
specific to cancerous tissue; if that were the case, then it might be
possible to pump enough energy into those phosphorus nuclei so that
they actually shivered loose from the cancer cell’s DNA, destroying the
cancer cell’s ability to function, and eventually killing it.
That’s an amazing thought — a science-fictional vision right out
of the Gernback Continuum. Step inside the booth — drop a quarter —
and have your incipient cancer not only diagnosed, but painlessly
obliterated by invisible Magnetic Healing Rays.
Who the heck could believe a visionary scenario like that?
Some things are unbelievable until you see them with your own
eyes. Until the vision is sitting right there in front of you. Where it
can no longer be denied that they’re possible.
A vision like the inside of your own brain, for instance.
SUPERGLUE
This is the Golden Age of Glue.
For thousands of years, humanity got by with natural glues like
pitch, resin, wax, and blood; products of hoof and hide and treesap
and tar. But during the past century, and especially during the past
thirty years, there has been a silent revolution in adhesion.
This stealthy yet steady technological improvement has been
difficult to fully comprehend, for glue is a humble stuff, and the
better it works, the harder it is to notice. Nevertheless, much of the
basic character of our everyday environment is now due to advanc
ed
adhesion chemistry.
Many popular artifacts from the pre-glue epoch look clunky
and almost Victorian today. These creations relied on bolts, nuts,
rivets, pins, staples, nails, screws, stitches, straps, bevels, knobs, and
bent flaps of tin. No more. The popular demand for consumer
objects ever lighter, smaller, cheaper, faster and sleeker has led to
great changes in the design of everyday things.
Glue determines much of the difference between our
grandparent’s shoes, with their sturdy leather soles, elaborate
stitching, and cobbler’s nails, and the eerie-looking modern jogging—
shoe with its laminated plastic soles, fabric uppers and sleek foam
inlays. Glue also makes much of the difference between the big
family radio cabinet of the 1940s and the sleek black hand-sized
clamshell of a modern Sony Walkman.
Glue holds this very magazine together. And if you happen to
be reading this article off a computer (as you well may), then you
are even more indebted to glue; modern microelectronic assembly
would be impossible without it.
Glue dominates the modern packaging industry. Glue also has
a strong presence in automobiles, aerospace, electronics, dentistry,
medicine, and household appliances of all kinds. Glue infiltrates
grocery bags, envelopes, books, magazines, labels, paper cups, and
cardboard boxes; there are five different kinds of glue in a common
filtered cigarette. Glue lurks invisibly in the structure of our
shelters, in ceramic tiling, carpets, counter tops, gutters, wall siding,
ceiling panels and floor linoleum. It’s in furniture, cooking utensils,
and cosmetics. This galaxy of applications doesn’t even count the
vast modern spooling mileage of adhesive tapes: package tape,
industrial tape, surgical tape, masking tape, electrical tape, duct tape,
plumbing tape, and much, much more.
Glue is a major industrial industry and has been growing at
twice the rate of GNP for many years, as adhesives leak and stick
into areas formerly dominated by other fasteners. Glues also create
new markets all their own, such as Post-it Notes (first premiered in
April 1980, and now omnipresent in over 350 varieties).
The global glue industry is estimated to produce about twelve
billion pounds of adhesives every year. Adhesion is a $13 billion